GP® Sealant is a novel low modules expansion joint sealant and adhesive, specially formulated to ensure bubble free cure even at a very high temperature and humidity climatic conditions. The product displays excellent thixotropy allowing its use even very large voids.
GP® Sealant cures by reaction with atmospheric humidity to produce a joint sealant with a 50% joint movement accommodation factor and excellent adhesion on substrates traditionally problematic for PU sealants, e.g. glass, aluminium, steel, polycarbonate, etc. The extrusion rate and tooling if the sealant remains the same throughout a very wide range of temperature and humidity conditions.
GP® Sealant is CE certified according to EN 15651-1, and specifically designed for sealing GP® Membrane reinforcement bar (RE-BAR) penetrations, and complex detailing areas such as fillet, tight corner transitions, terminations to concrete panels, facades, metal frames glass and granite materials.
600cc sausage, 15 sausages per box – applicator gun provided. 12 months shelf life. Use once opened.
Slide the sealant into the applicator gun, cut off the very end of the sealant packaging and fit the gun with the nozzle that has been cut to deliver the right bead size (min 5mm). Extrude the sealant into the joint, or around the RE_BAR penetration ensuring that no air is trapped in the joint. Tooling is recommended immediately after the application of sealant. The ratio width to depth should be 2:1 subject to a minimum depth of 10mm.
Site Investigation Reports Monitoring Results. We review these reports and advise routes for compliance.
Full Ground Gas Protection System Design available.
Wide library of standard details with site specific details on request.
All our installers are certified NVQ Level 2 qualified installation contractors.
We ensure your project complies with the relevant building regulations.
Ground Gas Standards
There are many different standards and guidance documents that detail how to understand the risk of ground contamination, and design solutions to mitigate these risks. The different documents relate to different ground contamination. Below are some of the key documents to be aware of and refer to:
CIRIA C735:2014 – Good practice on testing and verification of protection systems to buildings from hazardous gases
Good practice on testing and verification of protection systems to buildings from hazardous gases
Check design and detailing is in accordance with site requirements
Checks the competency of the installer (NVQ LEVEL 2 minimum)
Test integrity of the membrane/barrier system
Written report on inspection/testing and sign-off
BS8102:2009 – Code of practice for protection of below ground structures against water from the ground
JUTA Solutions & Applications
Our gas protection membranes suit a variety of applications and situations, with our TITAN® range offering not only gas protection but also having superior waterproofing and invasive weed control qualities.
NHBC (Amber 1)
BS8485:2015 + A1 2019 / NHBC (Amber 2)
BBA Agreement Certificate
Bulk Ground Gasses
Cardbon Dioxide and Methane
VOC Vapour Permeation
TYPE-A Bonded Waterproofing
Invasive Weed Control
SuDs Impermeable Membrane
GP® LIQUID GAS BARRIER
Get In Touch With The Experts
If you feel first class service, premium products direct from source, and bespoke solutions are right for you then don't hesitate to contact our team today on 01772 754177 or email us at email@example.com