TITAN

GP® TITANTANK

GP® TITANTANK – Self-adhesive version of the GP® TITANFLEX; composed of self-adhesive with an upper surface finish of GP® TITANFLEX, and a lower surface finish of siliconized polypropylene release film.

Read More

Product Benefits

  • Used for the gas / waterproofing / tanking of underground structures where harmful ground gases are anticipated.
  • Fully compliant with NHBC standards, CIRIA C748, BS 8485:2015 and BS 8102:2009.
Product Description

 

  • High resistance to ground gases.
  • Exceptional Chemical Resistance.
  • Manufactured to meet the most up to date British Standards and guidance.
  • Long term durability (performance guaranteed for lifetime of the building.
GP® TITANTANK

Take a look at the physical properties of GP® TITANTANK. For full product information please see the full datasheet linked below.

View Data Sheet
Thickness1.2mm
Width1 or 0.3m
Length20m
Weight1350 G/M2
Full informationCheck out the full data sheet above
  • Quick and easy installation.
  • Can be a fully welded system.
GP® TITANTANK
Site Investigation
Site Investigation
Site Investigation Reports Monitoring Results. We review these reports and advise routes for compliance.
System Design
System Design
Full Ground Gas Protection System Design available.
Specification
Specification
Wide library of standard details with site specific details on request.
Installation
Installation
All our installers are certified NVQ Level 2 qualified installation contractors.
Validation
Validation
We ensure your project complies with the relevant building regulations.

Ground Gas Standards

There are many different standards and guidance documents that detail how to understand the risk of ground contamination, and design solutions to mitigate these risks. The different documents relate to different ground contamination. Below are some of the key documents to be aware of and refer to:

BS 8485:2015+A1:2019 – Codes of practice for the design of protective measures for methane and carbon dioxide ground gases for new buildings.

  • Ground gases typically found near landfill sites, but can occur from other sources
  • Encourages the use of qualified installers
  • Validation to Ciria C735 is a requirement
  • Additional influences on the system should be considered, such as the hydrostatic conditions, and the likelihood of the source contaminant being in direct contact with the protective measures proposed
GP® TITANTANK

BRE 211:2015 – Guidance on protective measures for new buildings. (RADON)

  • Naturally occurring ground gas. Larger concentrations in the South-West of UK
  • Minimum recommendation is a membrane of 300 micrometre (1200 gauge) polyethylene sheet or equivalent
  • It must be installed with considerable care and protected once installed
    Taped laps are required
GP® TITANTANK

CIRIA C748:2014 – Guidance on the use of plastic membranes as VOC vapour barriers

CIRIA C682:2009 – VOC Handbook

  • Risk-based approach
  • No quantifiable limits on material performance
  • Testing to ISO 15105-2 and EN 14414/EN 14415
  • 9 main VOC types are tested for
  • Welded laps are required as most tapes are made from bitumen/butyl and are affected by VOCs
GP® TITANTANK

CIRIA C735:2014 – Good practice on testing and verification of protection systems to buildings from hazardous gases

  • Good practice on testing and verification of protection systems to buildings from hazardous gases
  • Check design and detailing is in accordance with site requirements
  • Checks the competency of the installer (NVQ LEVEL 2 minimum)
  • Test integrity of the membrane/barrier system
  • Visual inspection
  • Written report on inspection/testing and sign-off

BS8102:2009 – Code of practice for protection of below ground structures against water from the ground

GP® TITANTANK

JUTA Solutions & Applications

Our gas protection membranes suit a variety of applications and situations, with our TITAN® range offering not only gas protection but also having superior waterproofing and invasive weed control qualities.

BRE 211NHBC (Amber 1)BS8485:2015 + A1 2019 / NHBC (Amber 2)C748C748BS8102:2009RPS178C753BBA Agreement Certificate
RadonBulk Ground GassesCardbon Dioxide and MethaneVOC Vapour PermeationHydrocarbons ImmersionsTYPE-A Bonded WaterproofingInvasive Weed ControlSuDs Impermeable Membrane
GP®1
GP®2
GP®4
GP®H
GP®L
GP® TITANFLEX
GP® TITANBOND
GP® TITANTANK
GP® LIQUID GAS BARRIER
GHDPE 0.6mm

Get In Touch With The Experts

If you feel first class service, premium products direct from source, and bespoke solutions are right for you then don't hesitate to contact our team today on 01772 754177 or email us at info@juta.co.uk

Contact Us