JUTA WP SAM is a waterproof, self-adhesive membrane. It is a bituminous waterproof sheet, composed of self-adhesive SBS polymer-modified bitumen with an upper surface finish of grey co-extruded polyolefin, and a lower surface fish of siliconised release paper. JUTA QP SAM is used for the waterproofing of underground structures, and to prevent the ingress of RADON.
Roll weights can be in excess of 20kg (approx. 33kg/ roll) and hence appropriate care and equipment is required for unloading and handling. This product is non-toxic nor flammable.
Rolls of JUTA WP SAM should be stored horizontally, and pallets should not be stacked o top of one another.
JUTA WP SAM should be stored in a cool, dry place, and be protected from exposure to rain, sun, heat and cold temperatures prior to installation. Exposure to sunlight for an extended period of time could cause difficulty with the removal of the release film.
JUTA WP SAM should be installed in accordance with the product installation guidelines. It is recommended that JUTA WP SAM is not applied in temperature below 10° C, in colder weather, the material can be warmed slightly to aid adhesion.
Take a look at the physical properties of our JUTA WP SAM. For full product information please see the datasheet linked below.
Site Investigation Reports Monitoring Results. We review these reports and advise routes for compliance.
Full Ground Gas Protection System Design available.
Wide library of standard details with site specific details on request.
All our installers are certified NVQ Level 2 qualified installation contractors.
We ensure your project complies with the relevant building regulations.
Ground Gas Standards
There are many different standards and guidance documents that detail how to understand the risk of ground contamination, and design solutions to mitigate these risks. The different documents relate to different ground contamination. Below are some of the key documents to be aware of and refer to:
CIRIA C735:2014 – Good practice on testing and verification of protection systems to buildings from hazardous gases
Good practice on testing and verification of protection systems to buildings from hazardous gases
Check design and detailing is in accordance with site requirements
Checks the competency of the installer (NVQ LEVEL 2 minimum)
Test integrity of the membrane/barrier system
A written report on inspection/testing and sign-off
BS8102:2009 – Code of practice for protection of below ground structures against water from the ground
JUTA Solutions & Applications
Our gas protection membranes suit a variety of applications and situations, with our TITAN® range offering not only gas protection but also having superior waterproofing and invasive weed control qualities.
If you feel first class service, premium products direct from source, and bespoke solutions are right for you then don't hesitate to contact our team today on 01772 754177 or email us at email@example.com